Saturday, 19 July 2014

Something To Do Saturdays

Welcome back to my blog and today's article/ blog post about... Something to do. Now taking into advantage of my current location (Vancouver) We are going to be going under a series of different things in this topic in the next few months. Now, today I'm going to post something simple. Something to do Saturdays meet DIY.

Today's project will be a little more hands-on and a little bit more making stuff so... skip this if you don't want to learn how to make a cool way to make your own modern lawn chair.

Stuff you'll need:


  • Saw (Serrated is preferred, but anything works)
  • 30 x 30 inch (76 cm x 76 cm) fabric and sewing machine or kit. (and scissors)
  • Lots of cotton stuffing.
  • [14] 2 x 1 x 30 inch (5.8 x 5.8 x 76 cm) wood. (it should be 2 inches wide, 1 inch tall and 30 inches long. Or really, however tall you want your lawn chair to be)
  • [4-12] Elastic cord that matches your fabric colour (the more you have, the more the chair will slink downwards)
  • Coloured paint and/or chalk paint.
  • Hammer and Nails (or electric)
  • [2] 30 x 30 inch (76 cm) sheet wood
  • [1] 30 x 7 inch (17.75 cm) sheet wood
What to do
  1. Create a square-like shape by place 2 of the 2 x 2 x 30 inch wood pieces upright. Take the wood and then put another piece between it so that it is perpendicular to the 2 pieces (which are parallel to each other) Nail this together. Create another one like this for the other side. 
  2. Taking on of your create "C" shape wooden frames, add another piece of wood in the middle. Lodge that between the first two wooden pieces and nail that in. Do the same for the other side. 
  3. Flip the frame around so that there is an empty space where the 2 wood pieces touch the ground. Place a piece of wood between them and nail that in. The finished product should look something like 2 screen doors. 
  4. Take the two frames , hold them upright, and place a piece of wood at the bottom. Nail this in. Then proceed to do another one in the middle and one on the top. And the nail one only at the bottom of the blank side.
  5. Take your elastic cords and secure them onto the sides of the wood. Taking that, secure the elastic to the fabric. Measure your fabric so that it is slightly tight when it arrives at the end point (which is the middle of the blank side)
  6. Nail the sheet wood to the back and the bottom of the chair and then the smaller piece at the front, bottom. Secure some more elastics to the front and cut where you measured it to end at. Secure the fabric to the elastics.
  7. Paint how you like and test out before letting anyone else sit on it.
  8. For added comfort, you can place something soft below the fabric, like a pillow. 
This chair is almost like a little hammock, be careful though, as it is slightly unstable, unless you add some good security and some thicker wood. 

Until next time you guys!

~Larry

No comments:

Post a Comment